Hallo,
hat hier schon jemand den Hifiberry Amp+ mit Wheezy am laufen?
Ich habe mich durch diese Anleitung gearbeitet.
Allerdings sagt mir aplay folgendes:
Gibt es da noch was zu beachten?
/Zac
Hallo,
hat hier schon jemand den Hifiberry Amp+ mit Wheezy am laufen?
Ich habe mich durch diese Anleitung gearbeitet.
Allerdings sagt mir aplay folgendes:
Gibt es da noch was zu beachten?
/Zac
Wheezy & Hifiberry Amp+? Schau mal ob du hier fündig wirst!
hier mal der Inhalt...
die /etc/asound.conf angelegt mit
und dann mit
die Rechte angepasst.
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Parameters can be specified after the module name.
snd_soc_bcm2708
bcm2708_dmaengine
snd_soc_hifiberry_amp
#snd-bcm2835
Alles anzeigen
Mein Netzteil für Hifiberry & PI liefert mir bei 12 V 1400 mA. Kann es daran liegen?
Danke!
/Zac
Sagt das keinem etwas? Warum wird die Karte nicht erkannt?
/zac
Hi Marvin;
das hier:
pi@raspberrypi ~ $ lsmod |grep snd
snd_soc_hifiberry_amp 2283 0
snd_soc_core 177920 1 snd_soc_hifiberry_amp
snd_compress 8698 1 snd_soc_core
snd_pcm_dmaengine 5850 1 snd_soc_core
snd_pcm 93100 2 snd_soc_core,snd_pcm_dmaengine
snd_seq 61097 0
snd_seq_device 7209 1 snd_seq
snd_timer 23007 2 snd_pcm,snd_seq
snd 67211 6 snd_soc_core,snd_timer,snd_pcm,snd_seq,snd_seq_device,snd_compress
Wird doch richtig geladen; so wie ich das sehe..... als Laie
meine alsa-base.conf:
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; : ; }
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; }
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; }
# Keep snd-pcsp from beeing loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
Alles anzeigen
hier habe ich nichts angepasst..
oder welche "alsa.conf" meinst du?
/Zac
Problem gelöst:
https://www.hifiberry.com/forums/topic/p…ing-amp/page/3/
/zac
Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!