SMS empfangen mit Huawei E1550

tobiash · October 29, 2016 at 5:52 PM

Hallo,
ich versuche, auf meinem Raspi und einem über aktiven Hub angeschlossenen Huawei E1550 SMS zu senden und zu empfangen (hauptsl. empfangen). Aktuell läuft "Linux raspberrypi 4.4.9-v7"

Code

dmesg | grep tty
[    6.543103] usb 1-1.5.4: GSM modem (1-port) converter now attached to ttyUSB0
[    6.543867] usb 1-1.5.4: GSM modem (1-port) converter now attached to ttyUSB1
[    6.546869] usb 1-1.5.4: GSM modem (1-port) converter now attached to ttyUSB2

Code

lsusb
Bus 001 Device 005: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem

Code

sudo gammu --identify
Gerät               : /dev/ttyUSB0
Hersteller           : Huawei
Modell               : E1550 (E1550)
Firmware             : 11.608.14.11.00
IMEI                 : 352xxxxxxxxxxx
SIM-IMSI             : 262xxxxxxxxxxx

Code

sudo gammu networkinfo
Netzstärke          : Fordere Netz an
Paketnetzwerkstatus  : Fordere Netz an
GPRS                 : gelöst

Die SIM-Karte ist aktiviert, braucht keine PIN und hat ausreichend Guthaben. Zum Testen habe ich sie in ein altes Nokia gesteckt, funktioniert alles einwandfrei. Provider ist blau.de

Code

echo "some message" | sudo gammu --sendsms TEXT 49179xxxxxxxxxxx
Kein Zugriff auf die SIM-Karte.

Wo kann ich noch nach dem Fehler suchen? Danke für Hinweise.

Bot · Vor 5 Minuten

SMS empfangen mit Huawei E1550? Schau mal ob du hier fündig wirst!

meigrafd · October 29, 2016 at 6:17 PM

FAQ => Nützliche Links / Linksammlung => Server/PI Steuerung via SMS

tobiash · October 29, 2016 at 8:12 PM

Quote from meigrafd

FAQ => Nützliche Links / Linksammlung => Server/PI Steuerung via SMS

Hab' ich nach der Anleitung installiert, aber das Verzeichnis /var/spool/sms/incoming/ bleibt leer.
Die Datei smsd.conf ist rammelvoll mit #auskommentierten Zeilen, was ist wichtig fürs Empfangen?
Meine schaut jetzt so aus:

Code

[GSM1]
init = ATE0
device = /dev/ttyUSB0
incoming = yes
signal_quality_ber_ignore = yes
mode = new
smsc = 491770610000
baudrate = 19200

Bot · Vor einem Moment

tobiash · October 30, 2016 at 9:00 AM

Das sagt übrigens das logfile:

Code

2016-10-30 09:02:47,2, smsd: Smsd v3.1.15 started.
2016-10-30 09:02:47,2, smsd: Running as root:root.
2016-10-30 09:02:47,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.etHvKn /tmp/smsd_data.BzJ1O8
2016-10-30 09:02:47,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2016-10-30 09:02:47,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2016-10-30 09:02:47,5, smsd: Outgoing file checker has started. PID: 5091.
2016-10-30 09:02:47,7, smsd: All PID's: 5091,5092
2016-10-30 09:02:47,5, GSM1: Modem handler 0 has started. PID: 5092.
2016-10-30 09:02:47,5, GSM1: Using check_memory_method 1: CPMS is used.
2016-10-30 09:02:47,6, GSM1: Checking device for incoming SMS
2016-10-30 09:02:47,6, GSM1: Checking if modem is ready
2016-10-30 09:02:47,7, GSM1: -> AT
2016-10-30 09:02:47,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:47,7, GSM1: <- OK
2016-10-30 09:02:47,6, GSM1: Pre-initializing modem
2016-10-30 09:02:47,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2016-10-30 09:02:47,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:48,7, GSM1: <- OK
2016-10-30 09:02:48,6, GSM1: Checking if modem needs PIN
2016-10-30 09:02:48,7, GSM1: -> AT+CPIN?
2016-10-30 09:02:48,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:48,7, GSM1: <- +CPIN: READY OK
2016-10-30 09:02:48,7, GSM1: -> AT+CSQ
2016-10-30 09:02:48,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:49,7, GSM1: <- +CSQ: 10,99 OK
2016-10-30 09:02:49,6, GSM1: Signal Strength Indicator: (10,99) -93 dBm (Workable)
2016-10-30 09:02:49,6, GSM1: Checking if Modem is registered to the network
2016-10-30 09:02:49,7, GSM1: -> AT+CREG?
2016-10-30 09:02:49,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:49,7, GSM1: <- +CREG: 2,2,9F19,3641 OK
2016-10-30 09:02:49,5, GSM1: MODEM IS NOT REGISTERED, WAITING 1 SEC. BEFORE RETRYING 1. TIME
2016-10-30 09:02:50,7, GSM1: -> AT+CSQ
2016-10-30 09:02:50,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:51,7, GSM1: <- +CSQ: 10,99 OK
2016-10-30 09:02:51,5, GSM1: Signal Strength Indicator: (10,99) -93 dBm (Workable)
2016-10-30 09:02:51,7, GSM1: -> AT+CREG?
2016-10-30 09:02:51,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:51,7, GSM1: <- +CREG: 2,2,9F19,3641 OK
2016-10-30 09:02:51,5, GSM1: MODEM IS NOT REGISTERED, WAITING 1 SEC. BEFORE RETRYING 2. TIME
2016-10-30 09:02:52,7, GSM1: -> AT+CSQ
2016-10-30 09:02:52,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:53,7, GSM1: <- +CSQ: 10,99 OK
2016-10-30 09:02:53,5, GSM1: Signal Strength Indicator: (10,99) -93 dBm (Workable)
2016-10-30 09:02:53,7, GSM1: -> AT+CREG?
2016-10-30 09:02:53,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:53,7, GSM1: <- +CREG: 2,2,9F19,3641 OK
2016-10-30 09:02:53,5, GSM1: MODEM IS NOT REGISTERED, WAITING 1 SEC. BEFORE RETRYING 3. TIME
2016-10-30 09:02:54,7, GSM1: -> AT+CSQ
2016-10-30 09:02:54,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:55,7, GSM1: <- +CSQ: 10,99 OK
2016-10-30 09:02:55,5, GSM1: Signal Strength Indicator: (10,99) -93 dBm (Workable)
2016-10-30 09:02:55,7, GSM1: -> AT+CREG?
2016-10-30 09:02:55,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:55,7, GSM1: <- +CREG: 2,2,9F19,3641 OK
2016-10-30 09:02:55,5, GSM1: MODEM IS NOT REGISTERED, WAITING 1 SEC. BEFORE RETRYING 4. TIME
2016-10-30 09:02:56,7, GSM1: -> AT+CSQ
2016-10-30 09:02:56,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:57,7, GSM1: <- +CSQ: 10,99 OK
2016-10-30 09:02:57,5, GSM1: Signal Strength Indicator: (10,99) -93 dBm (Workable)
2016-10-30 09:02:57,7, GSM1: -> AT+CREG?
2016-10-30 09:02:57,7, GSM1: Command is sent, waiting for the answer
2016-10-30 09:02:57,7, GSM1: <- +CREG: 2,2,9F19,3641 OK
2016-10-30 09:02:57,5, GSM1: MODEM IS NOT REGISTERED, WAITING 1 SEC. BEFORE RETRYING 5. TIME

Display More

Participate now!