RecalboxOS über Composite/HDMI Hilfe

Heute ist Stammtischzeit:
Jeden Donnerstag 20:30 Uhr hier im Chat.
Wer Lust hat, kann sich gerne beteiligen. ;)
  • Hallo ihr schlauen Köpfe,

    ich brauche bitte mal eure Hilfe. Erstmal habt ihr hier ein schönes Forum mit vielen interessanten Themen.

    Ich habe aber ein Problem wo ich alleine nicht mehr weit komme. Hier zu mein Problem.

    Ich habe mir für mein Auto ein neues Radio (DoppelDIN) gekauft und ich hatte die Idee mir ein Raspberry mit einzubauen zum zocken. Damals haben wir alle PlayStation in unsere Autos gebaut. :cool: Natürlich ist alles egal legal verbaut und ich möchte damit nicht bei der fahrt spielen. Bin selbst KFZ Mechaniker mit Frau und Kind:angel:

    Habe mir ein Raspberry 3b gekauft und wollte gern mit der RecalboxOS arbeiten. Gemacht getan alles laut Tutorials zusammen gebaut und installiert.

    Ich habe jetzt folgendes Problem. Das Radio hat logischer weiße Chinch Eingänge und ich möchte das Pi schon gern mal mit zum Kumpel nehmen oder zuhause via HDMI zocken.

    Ich bin leider zu doof dem Raspberry das beizubringen. :X

    Ich habe diese Anleitung Mein genutztes Tutorial.

    Nur leider deaktiviert aber diese Config.txt ja den HDMI Ausgang.

    Und auch so funktioniert der Composite mit dieser Config.txt leider nicht ordnungsgemäß.

    Ich weiß leider nicht welche Infos ihr noch braucht um mir zu helfen.

    Ich bedanke mich schonmal für jede Hilfe und jeden Tipp.

    MFG Oggy

  • Ich habe diese Anleitung Mein genutztes Tutorial.

    Nur leider deaktiviert aber diese Config.txt ja den HDMI Ausgang.

    Und auch so funktioniert der Composite mit dieser Config.txt leider nicht ordnungsgemäß.

    Wenn der HDMI Ausgang nach rückgängig machen der Änderungen in config.txt und recalbox.conf wieder funktioniert, dann wäre das eine Lösung für den ersten Punkt. Zu Zweitens, was meinst du mit "nicht ordnungsgemäß"?

  • Hallo daxb,

    ich entschuldige mich ich war gerade mal nicht im Land =)

    Wenn der HDMI Ausgang nach rückgängig machen der Änderungen in config.txt und recalbox.conf wieder funktioniert, dann wäre das eine Lösung für den ersten Punkt.

    Kann ich theor. auch einfach die Kommentare (#) vor den HDMI zeichen weglassen? Das soll bewirken das ich HDMI und Composite nutzen kann?!

    Zu Zweitens, was meinst du mit "nicht ordnungsgemäß"?

    Ich habe ein Bildrauschen auf dem Composite Ausgang gehabt. Er hat mir kurzzeitig Bild angezeigt und Ton hatte ich auch. Dann war das Bild aber wieder schwarz aber der Ton ist geblieben.

    Ich glaube aber ein Problem gefunden zu haben und zwar. Laut dieser Anleitung zum ändern der config.txt muss ich ja via SSH einstellen. Ich bin mir aber ehrlich gesagt nicht 100% sicher ob das alles so richtig ist.

    Aber anscheinend gibt es ja auch die Möglichkeit das über "Noobs" zu ändern?!

    Ich werde mich auf die Suche nach einer USB Tatatur begeben und dann noch einmal berichten ob ich nur zu doof für dieses SSH bin. =)

  • Kann ich theor. auch einfach die Kommentare (#) vor den HDMI zeichen weglassen? Das soll bewirken das ich HDMI und Composite nutzen kann?!

    Was? Einfach die Sachen die du geändert hast rückgängig machen. Dann sollte zumindest HDMI wieder funktionieren. Ich gehe mal davon aus das HDMI schon funktioniert hat. Informationen zur config.txt findest du hier: https://www.raspberrypi.org/documentation/…g-txt/README.md

    Ich habe ein Bildrauschen auf dem Composite Ausgang gehabt. Er hat mir kurzzeitig Bild angezeigt und Ton hatte ich auch. Dann war das Bild aber wieder schwarz aber der Ton ist geblieben.

    Dazu kann ich nichts sagen. Aber das ein Bild da war ist schon mal nicht schlecht. Möglicherweise ist das dann nur eine Einstellungssache.

    Noobs lass mal weg. SSH ist "nur" ein Fernzugriff. Von wo du die config.txt änderst soll erst mal egal sein.

  • So nochmal das ganze. Da ich soviel rumgespielt habe das nichts mehr ging, habe ich folgendes gemacht:

    1. Laut dieser Anleitung habe ich die Recalbox installiert.

    2. Diese Anleitung für die Composite einstellung.

    Wobei ich die HDMI nicht kommentiert habe und kein HDMI ignore eingetragen habe, da ich HDMI ja weiter nutzen möchte.

    Ich habe Ton aber kein Bild auf dem Composite, aber das habe ich auch schon vor Schritt 2. gehabt.

    Hier mal meine Einstellungen:

    Recalbox.config


    # System Variable
    # You can configure your recalbox from here
    # To set a variable, remove the first ; on the line

    # ------------ A - System Options ----------- #
    # Uncomment the system.power.switch you use
    ;system.power.switch=ATX_RASPI_R2_6 # http://lowpowerlab.com/atxraspi/#installation
    ;system.power.switch=MAUSBERRY # http://mausberry-circuits.myshopify.com/pages/setup
    ;system.power.switch=REMOTEPIBOARD_2003 # http://www.msldigital.com/pages/support-…tepi-board-2013
    ;system.power.switch=REMOTEPIBOARD_2005 # http://www.msldigital.com/pages/support-…board-plus-2015
    ;system.power.switch=WITTYPI # http://www.uugear.com/witty-pi-realt…or-raspberry-pi
    ;system.power.switch=PIN56ONOFF # https://github.com/recalbox/recal…ur-recalbox-(EN)
    ;system.power.switch=PIN56PUSH # https://github.com/recalbox/recal…ur-recalbox-(EN)
    ;system.power.switch=PIN356ONOFFRESET # https://github.com/recalbox/recal…ur-recalbox-(EN)
    ;system.power.switch=PIN356PUSHRESET # https://github.com/recalbox/recal…ur-recalbox-(EN)

    ## fbcp FrameBuffer Copy Program
    ## For small TFT screen on GPIO and SPI
    ## See https://github.com/recalbox/recal…screen-%28EN%29 for details
    ## Needed for Waveshare 3.2" 3.5" TFT screen, 2.8" Adafruit screen
    ## See https://github.com/recalbox/recal…PI-Bus-%28EN%29
    ## for support and configuration details needed by /boot/config.txt
    system.fbcp.enabled=0

    ## Splash screen duration
    ## 0: Video will be played for 20 seconds (default)
    ## -1: All the video will be played (it won't be stopped automatically)
    ## >0 : Time before the video will be stopped (in seconds)
    system.splash.length=0

    ## Recalbox Manager (http manager)
    system.manager.enabled=1
    ## 1 or 2, depending on the manager version you wish
    system.manager.version=2

    ## Recalbox security
    # enforce security
    # samba password required
    # disable virtual gamepads
    system.security.enabled=0

    ## Recalbox API (REST)
    system.api.enabled=0

    ## Allow a specific resolution for ES only from the command : tvservice -m [MODE]
    ## Leave commented for the default usual behaviour
    ;system.es.videomode=CEA 4 HDMI

    ## EmulationStation
    ### menu style
    ### default -> default all options menu
    ### none -> no menu except the game search menu
    ### bartop -> less menu, only needed for bartops
    emulationstation.menu=default
    ### Select a system to show on boot (use rom directory name) (string)
    emulationstation.selectedsystem=favorites
    ### Show the gamelist of the first or selected system on boot (0,1)
    emulationstation.bootongamelist=0
    ### Disable system view ES will boot and show ONLY the first or selected system (0,1)
    emulationstation.hidesystemview=0
    ### Parse Gamelists only. Show only games listed in gamelist.xml files (0,1)
    emulationstation.gamelistonly=0
    ### Force basicgameList view to be displayed, even if your game systems are scraped (0,1)
    emulationstation.forcebasicgamelistview=0

    ## Emulator special keys
    ## default -> default all special keys
    ## nomenu -> cannot popup the emulator menu
    ## none -> no special keys in emulators
    system.emulators.specialkeys=default

    ## Show or hide kodi in emulationstation (0,1)
    kodi.enabled=1
    ## Start kodi at launch (0,1)
    kodi.atstartup=0
    ## set x button shortcut (0,1)
    kodi.xbutton=1

    ## Allow a specific resolution for Kodi only from the command : tvservice -m [MODE]
    ## By default is using the default resolution of your screen
    kodi.videomode=default

    ## Kodi can wait for a network component before starting
    ## waithost is the ip or hostname that must answer to a ping to validate the availability
    ## waittime is the maximum time waited when kodi boots
    ## if waitmode is required, kodi will not start if the component is not available
    ## if waitmode is wish, kodi will start if the component is not available
    ## if waitmode is not set or has another value, kodi will start immediately
    ;kodi.network.waitmode=required
    ;kodi.network.waittime=10
    ;kodi.network.waithost=192.168.0.50

    ## Hyperion
    ## Hyperion allows you to use an ambilight like led system on your recalbox
    ## Use hypercon to create your configuration file, and copy it in /recalbox/share/system/configs/hyperion/hyperion.config.json
    hyperion.enabled=0


    # ------------ B - Network ------------ #
    ## Set system hostname
    system.hostname=RECALBOX
    ## Activate wifi (0,1)
    wifi.enabled=0
    ## Set wifi region
    ## More info here: https://github.com/recalbox/recal…fi-country-code
    wifi.region=US
    ## Wifi SSID (string)
    ;wifi.ssid=new ssid
    ## Wifi KEY (string)
    ## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"
    ## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot
    ## Escape your special chars (# ; $) with a backslash : $ => \$
    ;wifi.key=new key

    # secondary wifi (not configurable via the user interface)
    ;wifi2.ssid=new ssid
    ;wifi2.key=new key

    # third wifi (not configurable via the user interface)
    ;wifi3.ssid=new ssid
    ;wifi3.key=new key

    ## Samba share
    system.samba.enabled=1
    ### Virtual Gamepads
    system.virtual-gamepads.enabled=1
    ### SSH
    system.ssh.enabled=1

    # ------------ C - Audio ------------ #
    ## Set the audio device (auto, hdmi, jack)
    audio.device=auto
    ## Set system volume (0..100)
    audio.volume=90
    ## Enable or disable system sounds in ES (0,1)
    audio.bgmusic=1

    # -------------- D - Controllers ----------------- #
    # Enable support for standard bluetooth controllers
    controllers.bluetooth.enabled=1


    ## Please enable only one of these
    # -------------- D1 - PS3 Controllers ------------ #
    ##Enable PS3 controllers support
    controllers.ps3.enabled=1
    ## Choose a driver between bluez, official and shanwan
    ## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis
    ## official -> sixad drivers, support official and gasia sisaxis
    ## shanwan -> shanwan drivers, support official and shanwan sisaxis
    controllers.ps3.driver=bluez


    # ------------ D2 - GPIO Controllers ------------ #
    ## GPIO Controllers
    ## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
    controllers.gpio.enabled=0
    ## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
    controllers.gpio.args=map=1,2


    # ------------ D3 - Steam Controllers ------------ #
    ## Enable steam controller service
    controllers.steam.enabled=0


    ## DB9 Controllers
    ## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
    controllers.db9.enabled=0
    ## db9 arguments
    controllers.db9.args=map=1

    ## Gamecon controllers
    ## Enable gamecon controllers, for nes, snes psx (0,1)
    controllers.gamecon.enabled=0
    ## gamecon_args
    controllers.gamecon.args=map=1

    ## XGaming's XArcade Tankstik and other compatible devices
    controllers.xarcade.enabled=1

    # ------------ F - Language and keyboard ------------ #
    ## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
    system.language=de_DE
    ## set the keyboard layout (fr,en,de,us,es)
    ;system.kblayout=us
    ## Set you local time
    ## Select your timezone from : ls /usr/share/zoneinfo/ (string)
    ;system.timezone=Europe/Paris

    # ------------ G - UPDATES ------------ #
    ## Automatically check for updates at start (0,1)
    updates.enabled=1
    # Update type : default to stable
    updates.type=stable


    # ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ #
    ## The global value will be used for all emulators, except if the value
    ## is redefined in the emulator

    ## Set game resolution for emulators
    ## select your mode from the command : tvservice -m [MODE]
    ## CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced
    ## CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive
    ## use 'default' for using the default resolution
    ## use 'auto' : switches to CEA 4 HDMI if supported, else keep the current resolution
    ## (string)
    global.videomode=default
    ## Shader set
    ## Automatically select shaders for all systems
    ## (none, retro, scanlines)
    global.shaderset=none

    ## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
    global.integerscale=0

    ## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
    global.shaders=

    ## Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
    global.ratio=auto

    ## Set smooth for all emulators (0,1)
    global.smooth=1

    ## Set rewind for all emulators (0,1)
    global.rewind=1

    ## Set autosave/load savestate for all emulators (0,1)
    global.autosave=0

    ## Enable retroarchievements (0,1)
    ## Set your http://www.retroachievements.org username/password
    ## Escape your special chars (# ; $) with a backslash : $ => \$
    global.retroachievements=0
    global.retroachievements.hardcore=0
    global.retroachievements.username=
    global.retroachievements.password=

    ## Set retroarch input driver (auto, udev, sdl2)
    ## If you don't have issues with your controllers, let auto
    global.inputdriver=auto

    ## If you do not want recalboxOS to generate the configuration for all emulators (string)
    ;global.configfile=/path/to/my/configfile.cfg

    # ------------ I - EMULATORS CHOICES ----------- #
    ## You can override the global configuration here
    ## Here is the snes example
    ;snes.videomode=CEA 4 HDMI
    snes.core=snes9x_next
    ;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
    ;snes.ratio=16/9
    ;snes.smooth=0
    ;snes.rewind=1
    ;snes.autosave=0
    ;snes.emulator=libretro
    ;snes.integerscale=0
    ## If you do not want recalboxOS to generate the configuration for the emulator :
    ;snes.configfile=/path/to/my/configfile.cfg

    ## Default cores for RPi3
    snes.core=snes9x_next
    gba.core=mgba
    mame.core=mame078
    nes.core=fceunext

    ## NeoGeo emulator
    ## You can use pifba or a libretro core (fba2x,libretro)
    neogeo.emulator=libretro
    ## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)
    neogeo.core=fba

    ## N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)
    ## So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).
    ## If your screen is not compatible with one of these video modes, please check the recalbox's wiki.
    n64.videomode=DMT 4 HDMI
    ## If you are using a CRT screen, please change the setting above with this one :
    # n64.videomode=default

    ## Dreamcast emulator
    ## Like N64, such a CPU intensive emulator needs a small resolution
    ## Consider DMT 4 HDMI (640*480) or DMT 9 HDMI (800*600). If you have a black screen on dreamcast, try DMT 9 HDMI here
    dreamcast.videomode=DMT 4 HDMI

    # ------------ J - NETPLAY PARAMETERS ----------- #
    ## All the valuez here are handled by Recalbox itself
    global.netplay=1
    global.netplay.nickname=
    global.netplay.port=55435
    global.netplay.relay=
    global.netplay.systems=fba_libretro,mame,mastersystem,megadrive,neogeo,nes,pcengine,sega32x,sg1000,snes,supergrafx
    global.netplay.lobby=http://lobby.libretro.com/list/

    ## Configurations generated by Recalbox

    Und die /boot/config.txt kann ich leider nicht kopieren aber da mach ich auch nur das # (Kommentar) vor sdtv_mode=2 weg. Nennt mir bitte mein Fehler.

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!