hängt per Lankabel direkt am Laptop
Code2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether b8:27:eb:e9:f9:e3 brd ff:ff:ff:ff:ff:ff inet 192.168.1.2/24 brd 192.168.1.255 scope global dynamic noprefixroute eth0 pi@raspberrypi:~ $ ping -c 3 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=128 time=0.827 ms
OK. Diese IP-Adressen 192.168.1.1 und 192.168.1.2, hast Du diese manuell zugewiesen?
Das Subnetz 192.168.1.0/24 ist ja nicht das deines Routers, oder?
Hast Du einen Router mit DHCP-Server, an den Du deinen PI per Kabel anschließen kannst?