Deshalb meine Frage lässt sich das ganze auch wieder Rückgängig machen
Da braucht man nichts rückgängig machen. Man kann wahlweise von SD oder USB booten.
Je nachdem welches Bootmedium eingesteckt ist. SD-Karte rein >> SD-Boot, SD-Karte raus >> USB-Boot.
Das wird in der bootloader_config geregelt
Code
root@raspberrypi:~# vcgencmd bootloader_config
[all]
BOOT_UART=0
WAKE_ON_GPIO=1
POWER_OFF_ON_HALT=0
DHCP_TIMEOUT=45000
DHCP_REQ_TIMEOUT=4000
TFTP_FILE_TIMEOUT=30000
ENABLE_SELF_UPDATE=1
DISABLE_HDMI=0
BOOT_ORDER=0xf41
Alles anzeigen
Zitat von raspberrypi.orgBOOT_ORDER fields
The BOOT_ORDER property defines the sequence for the different boot modes. It is read right to left and up to 8 digits may be defined.
- 0x0 - NONE (stop with error pattern)
- 0x1 - SD CARD
- 0x2 - NETWORK
- 0x3 - USB device boot usbboot - Compute Module only.
- 0x4 - USB mass storage boot
- 0xf - RESTART (loop) - start again with the first boot order field.