Thomas, kannst du mir sagen, wo und was du da eingestellt hast?
Rapoo Funkmaus und Funktastatur
-
oaky -
8. Oktober 2020 um 11:41 -
Unerledigt
-
-
Rapoo Funkmaus und Funktastatur? Schau mal ob du hier fündig wirst!
-
Moin oaky,
habe meine Tastatur mal raus gekramt.
Spoiler anzeigen
Okt 09 17:53:13 bernd-test kernel: usb 1-1.3: new full-speed USB device number 5 using dwc_otg
Okt 09 17:53:13 bernd-test kernel: usb 1-1.3: New USB device found, idVendor=062a, idProduct=4101, bcdDevice=81.13
Okt 09 17:53:13 bernd-test kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Okt 09 17:53:13 bernd-test kernel: usb 1-1.3: Product: 2.4G Keyboard Mouse
Okt 09 17:53:13 bernd-test kernel: usb 1-1.3: Manufacturer: MOSART Semi.
Okt 09 17:53:13 bernd-test kernel: input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.3…01/input/input0
Okt 09 17:53:13 bernd-test kernel: hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-3f980000.usb-1.3/input0
Okt 09 17:53:13 bernd-test kernel: input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.3…02/input/input1
Okt 09 17:53:13 bernd-test kernel: input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.3…02/input/input2
Okt 09 17:53:13 bernd-test kernel: input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.3…02/input/input3
Okt 09 17:53:13 bernd-test kernel: input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.3…02/input/input4
Okt 09 17:53:13 bernd-test kernel: hid-generic 0003:062A:4101.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-3f980000.usb-1.3/input1
Okt 09 17:53:13 bernd-test mtp-probe[1716]: checking bus 1, device 5: "/sys/devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.3"
Okt 09 17:53:13 bernd-test mtp-probe[1716]: bus: 1, device: 5 was not an MTP device
Okt 09 17:53:13 bernd-test systemd-udevd[1722]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1.
Okt 09 17:53:13 bernd-test mtp-probe[1730]: checking bus 1, device 5: "/sys/devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.3"
Okt 09 17:53:13 bernd-test mtp-probe[1730]: bus: 1, device: 5 was not an MTP device
Okt 09 17:53:14 bernd-test systemd-udevd[1719]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1.
Okt 09 17:53:14 bernd-test systemd-udevd[1714]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1.
Okt 09 17:53:14 bernd-test systemd-logind[396]: Watching system buttons on /dev/input/event0 (MOSART Semi. 2.4G Keyboard Mouse)
Okt 09 17:53:14 bernd-test systemd-udevd[1717]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1.
Okt 09 17:53:14 bernd-test systemd-logind[396]: Watching system buttons on /dev/input/event3 (MOSART Semi. 2.4G Keyboard Mouse System Control)
Okt 09 17:53:14 bernd-test systemd-udevd[1720]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1.
Okt 09 17:53:14 bernd-test systemd-udevd[1718]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1.
Okt 09 17:53:14 bernd-test systemd-logind[396]: Watching system buttons on /dev/input/event2 (MOSART Semi. 2.4G Keyboard Mouse Consumer Control)
Okt 09 17:55:28 bernd-test lightdm[593]: pam_unix(lightdm:auth): authentication failure; logname= uid=0 euid=0 tty=:0 ruser= rhost= user=pi
Wie man sieht kommt bei mir auch die Fehlermeldung bezüglich THD, aber sie funktioniert.
Wie man bei mir sehen kann, gehen die Meldungen noch weiter. ist es bei dir auch so? oder endet es so wie in deinem Beitrag #6?
Habs gerade nochmal probiert die syslog war bzgl. Rapoo vollständig. Hier nochmal meine aktuelle syslog:
Oct 10 11:02:59 RasPi3 systemd[1]: Started Cleanup of Temporary Directories.
Oct 10 11:03:01 RasPi3 CRON[28219]: (pi) CMD (/home/pi/snap2record.sh && /home/pi/rec2day.sh)
Oct 10 11:03:04 RasPi3 CRON[28214]: (CRON) info (No MTA installed, discarding output)
Oct 10 11:03:41 RasPi3 kernel: [87447.762227] usb 1-1.2: USB disconnect, device number 7
Oct 10 11:03:46 RasPi3 kernel: [87451.919065] usb 1-1.2: new full-speed USB device number 8 using dwc_otg
Oct 10 11:03:46 RasPi3 kernel: [87452.062468] usb 1-1.2: New USB device found, idVendor=24ae, idProduct=2010
Oct 10 11:03:46 RasPi3 kernel: [87452.062484] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Oct 10 11:03:46 RasPi3 kernel: [87452.062492] usb 1-1.2: Product: Rapoo 2.4G Wireless Device
Oct 10 11:03:46 RasPi3 kernel: [87452.062500] usb 1-1.2: Manufacturer: RAPOO
Oct 10 11:03:46 RasPi3 kernel: [87452.074259] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.2…07/input/input6
Oct 10 11:03:46 RasPi3 kernel: [87452.074709] hid-generic 0003:24AE:2010.0007: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-3f980000.usb-1.2/input0
Oct 10 11:03:46 RasPi3 kernel: [87452.081410] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.2…08/input/input7
Oct 10 11:03:46 RasPi3 kernel: [87452.149678] hid-generic 0003:24AE:2010.0008: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-3f980000.usb-1.2/input1
Oct 10 11:03:46 RasPi3 kernel: [87452.153951] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.2…09/input/input8
Oct 10 11:03:46 RasPi3 kernel: [87452.220202] hid-generic 0003:24AE:2010.0009: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-3f980000.usb-1.2/input2
Oct 10 11:03:46 RasPi3 mtp-probe: checking bus 1, device 8: "/sys/devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.2"
Oct 10 11:03:46 RasPi3 mtp-probe: bus: 1, device: 8 was not an MTP device
Oct 10 11:03:46 RasPi3 systemd-udevd[28278]: Process '/usr/sbin/th-cmd --socket /var/run/thd.socket --passfd --udev' failed with exit code 1.
Oct 10 11:04:01 RasPi3 CRON[28296]: (pi) CMD (/home/pi/snap2record.sh && /home/pi/rec2day.sh)
Oct 10 11:04:04 RasPi3 CRON[28291]: (CRON) info (No MTA installed, discarding output)
oaky
-
Jetzt mitmachen!
Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!