Hallo
Ich habe folgendes Problem, Ich habe einen RP4 mit grossem Speicher (Boot auf SSD) und möchte daran folgende Erweiterungen betreiben:
USB-HUB aktiv
SSD an USB 3
Doppel-Maple-CUL 868 MHz und 433 MHz
Jeelink Dongle
ZWave USB-Stick
Mit ls bekomme ich folgende Ergbnisse :
ls -l /dev/serial/by-id
totalt 0
lrwxrwxrwx 1 root root 13 okt 22 10:05 usb-0658_0200_E3040A02-4A02-010C-2423-041800F79CB8-if00 -> ../../ttyACM0
lrwxrwxrwx 1 root root 13 okt 22 10:05 usb-SHK_JeeLink_LaCrosse-if00-port0 -> ../../ttyUSB0
mit lsusb :
lsusb
Bus 002 Device 004: ID 1058:25ee Western Digital Technologies, Inc.
Bus 002 Device 003: ID 174c:55aa ASMedia Technology Inc. Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 002 Device 002: ID 05e3:0626 Genesys Logic, Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 1c4f:0026 SiGma Micro Keyboard
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
Bus 001 Device 005: ID 0658:0200 Sigma Designs, Inc. Aeotec Z-Stick Gen5 (ZW090) - UZB
Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Wie bekomme ich die gesteckten Dongle zum laufen ? Irgendwie kommt es ja zu Konflikten
Im Voraus herzlichen Dank
Jörg