Hallo,
besitze ein Raspberry PI 4 B 4GB und ein 7" Touch Display (eingebaut in ein Gehäuse). Daher sollte der Bildschirm 180° verdreht sein. Habe mich intensiv in verschiedenen Forum's umgesehen. Leider habe alle "Lösungen" keinen Erfolg gebracht Bin ich der einzige der trotz der Änderungen im config.txt das nicht funktioniert?
Auf meinem Raspberry PI 4 läuft aktuell die RepetierServer Pro Applikation. Sollte jedoch aus meiner Sicht keinen Einfluss haben. Oder doch?
Meine Einstellungen:
Allow higher load on usb
max_usb_current=1
disable_splash=1
# Flips the display using the LCD's inbuilt flip functionality. Rotation: 0 = normal, 1 = 90°, 2 = 180°, 3 = 270°
# lcd_rotate=0
# Rotate in gpu instead. 90 and 270° require extra memory!
# display_hdmi_rotate=0
# For legacy drivers, same as display_hdmi_rotate
# display_lcd_rotate=0
# Deprecated, for backward compatibility
# display_rotate=2
.
.
[pi0]
# Uncomment for network over usb
# Has sideeffects on usb bandwidth so webcams or usb sticks might get problems
#dtoverlay=dwc2
# Also add at end of cmdline.txt this: modules-load=dwc2,g_ether
[pi4]
# Enable DRM VC4 V3D driver on top of the dispmanx display stack
dtoverlay=vc4-fkms-v3d
max_framebuffers=2
[all]
#dtoverlay=vc4-fkms-v3d
start_x=1
gpu_mem=128
Besten Dank vorab für eine Lösung.