Argon Lüftersteuerung Fehlermeldung

#!/bin/bash


argon_create_file() {
    if [ -f $1 ]; then
        sudo rm $1
    fi
    sudo touch $1
    sudo chmod 666 $1
}
argon_check_pkg() {
    RESULT=$(dpkg-query -W -f='${Status}\n' "$1" 2> /dev/null | grep "installed")

    if [ "" == "$RESULT" ]; then
        echo "NG"
    else
        echo "OK"
    fi
}

# Check if Raspbian, Ubuntu, others
CHECKPLATFORM="Others"
if [ -f "/etc/os-release" ]
then
    source /etc/os-release
    if [ "$ID" = "raspbian" ]
    then
        CHECKPLATFORM="Raspbian"
    elif [ "$ID" = "ubuntu" ]
    then
        CHECKPLATFORM="Ubuntu"
    fi
fi


if [ "$CHECKPLATFORM" = "Raspbian" ]
then
    pkglist=(raspi-gpio python3-rpi.gpio python3-smbus i2c-tools)    
else
    # Todo handle lgpio
    # Ubuntu has serial and i2c enabled
    pkglist=(python3-rpi.gpio python3-smbus i2c-tools)
fi

for curpkg in ${pkglist[@]}; do
    sudo apt-get install -y $curpkg
    RESULT=$(argon_check_pkg "$curpkg")
    if [ "NG" == "$RESULT" ]
    then
        echo "********************************************************************"
        echo "Please also connect device to the internet and restart installation."
        echo "********************************************************************"
        exit
    fi
done

# Ubuntu Mate for RPi has raspi-config too
command -v raspi-config &> /dev/null
if [ $? -eq 0 ]
then
    # Enable i2c and serial
    sudo raspi-config nonint do_i2c 0
    sudo raspi-config nonint do_serial 2
fi

# Helper variables
daemonname="argononed"
powerbuttonscript=/usr/bin/$daemonname.py
shutdownscript="/lib/systemd/system-shutdown/"$daemonname"-poweroff.py"
daemonconfigfile=/etc/$daemonname.conf
configscript=/usr/bin/argonone-config
removescript=/usr/bin/argonone-uninstall

daemonfanservice=/lib/systemd/system/$daemonname.service
    
if [ ! -f $daemonconfigfile ]; then
    # Generate config file for fan speed
    sudo touch $daemonconfigfile
    sudo chmod 666 $daemonconfigfile
    echo '#' >> $daemonconfigfile
    echo '# Argon One Fan Configuration' >> $daemonconfigfile
    echo '#' >> $daemonconfigfile
    echo '# List below the temperature (Celsius) and fan speed (in percent) pairs' >> $daemonconfigfile
    echo '# Use the following form:' >> $daemonconfigfile
    echo '# min.temperature=speed' >> $daemonconfigfile
    echo '#' >> $daemonconfigfile
    echo '# Example:' >> $daemonconfigfile
    echo '# 55=10' >> $daemonconfigfile
    echo '# 60=55' >> $daemonconfigfile
    echo '# 65=100' >> $daemonconfigfile
    echo '#' >> $daemonconfigfile
    echo '# Above example sets the fan speed to' >> $daemonconfigfile
    echo '#' >> $daemonconfigfile
    echo '# NOTE: Lines begining with # are ignored' >> $daemonconfigfile
    echo '#' >> $daemonconfigfile
    echo '# Type the following at the command line for changes to take effect:' >> $daemonconfigfile
    echo '# sudo systemctl restart '$daemonname'.service' >> $daemonconfigfile
    echo '#' >> $daemonconfigfile
    echo '# Start below:' >> $daemonconfigfile
    echo '55=10' >> $daemonconfigfile
    echo '60=55' >> $daemonconfigfile
    echo '65=100' >> $daemonconfigfile
fi

# Generate script that runs every shutdown event
argon_create_file $shutdownscript

echo "#!/usr/bin/python3" >> $shutdownscript
echo 'import sys' >> $shutdownscript
echo 'import smbus' >> $shutdownscript
echo 'import RPi.GPIO as GPIO' >> $shutdownscript
echo 'rev = GPIO.RPI_REVISION' >> $shutdownscript
echo 'if rev == 2 or rev == 3:' >> $shutdownscript
echo '    bus = smbus.SMBus(1)' >> $shutdownscript
echo 'else:' >> $shutdownscript
echo '    bus = smbus.SMBus(0)' >> $shutdownscript

echo 'if len(sys.argv)>1:' >> $shutdownscript
echo "    bus.write_byte(0x1a,0)"  >> $shutdownscript

# powercut signal
echo '    if sys.argv[1] == "poweroff" or sys.argv[1] == "halt":'  >> $shutdownscript
echo "        try:"  >> $shutdownscript
echo "            bus.write_byte(0x1a,0xFF)"  >> $shutdownscript
echo "        except:"  >> $shutdownscript
echo "            rev=0"  >> $shutdownscript

sudo chmod 755 $shutdownscript

# Generate script to monitor shutdown button

argon_create_file $powerbuttonscript

echo "#!/usr/bin/python3" >> $powerbuttonscript
echo 'import smbus' >> $powerbuttonscript
echo 'import RPi.GPIO as GPIO' >> $powerbuttonscript
echo 'import os' >> $powerbuttonscript
echo 'import time' >> $powerbuttonscript
echo 'from threading import Thread' >> $powerbuttonscript
echo 'rev = GPIO.RPI_REVISION' >> $powerbuttonscript
echo 'if rev == 2 or rev == 3:' >> $powerbuttonscript
echo '    bus = smbus.SMBus(1)' >> $powerbuttonscript
echo 'else:' >> $powerbuttonscript
echo '    bus = smbus.SMBus(0)' >> $powerbuttonscript

echo 'GPIO.setwarnings(False)' >> $powerbuttonscript
echo 'GPIO.setmode(GPIO.BCM)' >> $powerbuttonscript
echo 'shutdown_pin=4' >> $powerbuttonscript
echo 'GPIO.setup(shutdown_pin, GPIO.IN,  pull_up_down=GPIO.PUD_DOWN)' >> $powerbuttonscript

echo 'def shutdown_check():' >> $powerbuttonscript
echo '    while True:' >> $powerbuttonscript
echo '        pulsetime = 1' >> $powerbuttonscript
echo '        GPIO.wait_for_edge(shutdown_pin, GPIO.RISING)' >> $powerbuttonscript
echo '        time.sleep(0.01)' >> $powerbuttonscript
echo '        while GPIO.input(shutdown_pin) == GPIO.HIGH:' >> $powerbuttonscript
echo '            time.sleep(0.01)' >> $powerbuttonscript
echo '            pulsetime += 1' >> $powerbuttonscript
echo '        if pulsetime >=2 and pulsetime <=3:' >> $powerbuttonscript
echo '            os.system("reboot")' >> $powerbuttonscript
echo '        elif pulsetime >=4 and pulsetime <=5:' >> $powerbuttonscript
echo '            os.system("shutdown now -h")' >> $powerbuttonscript

echo 'def get_fanspeed(tempval, configlist):' >> $powerbuttonscript
echo '    for curconfig in configlist:' >> $powerbuttonscript
echo '        curpair = curconfig.split("=")' >> $powerbuttonscript
echo '        tempcfg = float(curpair[0])' >> $powerbuttonscript
echo '        fancfg = int(float(curpair[1]))' >> $powerbuttonscript
echo '        if tempval >= tempcfg:' >> $powerbuttonscript
echo '            if fancfg < 1:' >> $powerbuttonscript
echo '                return 0' >> $powerbuttonscript
echo '            elif fancfg < 25:' >> $powerbuttonscript
echo '                return 25' >> $powerbuttonscript
echo '            return fancfg' >> $powerbuttonscript
echo '    return 0' >> $powerbuttonscript

echo 'def load_config(fname):' >> $powerbuttonscript
echo '    newconfig = []' >> $powerbuttonscript
echo '    try:' >> $powerbuttonscript
echo '        with open(fname, "r") as fp:' >> $powerbuttonscript
echo '            for curline in fp:' >> $powerbuttonscript
echo '                if not curline:' >> $powerbuttonscript
echo '                    continue' >> $powerbuttonscript
echo '                tmpline = curline.strip()' >> $powerbuttonscript
echo '                if not tmpline:' >> $powerbuttonscript
echo '                    continue' >> $powerbuttonscript
echo '                if tmpline[0] == "#":' >> $powerbuttonscript
echo '                    continue' >> $powerbuttonscript
echo '                tmppair = tmpline.split("=")' >> $powerbuttonscript
echo '                if len(tmppair) != 2:' >> $powerbuttonscript
echo '                    continue' >> $powerbuttonscript
echo '                tempval = 0' >> $powerbuttonscript
echo '                fanval = 0' >> $powerbuttonscript
echo '                try:' >> $powerbuttonscript
echo '                    tempval = float(tmppair[0])' >> $powerbuttonscript
echo '                    if tempval < 0 or tempval > 100:' >> $powerbuttonscript
echo '                        continue' >> $powerbuttonscript
echo '                except:' >> $powerbuttonscript
echo '                    continue' >> $powerbuttonscript
echo '                try:' >> $powerbuttonscript
echo '                    fanval = int(float(tmppair[1]))' >> $powerbuttonscript
echo '                    if fanval < 0 or fanval > 100:' >> $powerbuttonscript
echo '                        continue' >> $powerbuttonscript
echo '                except:' >> $powerbuttonscript
echo '                    continue' >> $powerbuttonscript
echo '                newconfig.append( "{:5.1f}={}".format(tempval,fanval))' >> $powerbuttonscript
echo '        if len(newconfig) > 0:' >> $powerbuttonscript
echo '            newconfig.sort(reverse=True)' >> $powerbuttonscript
echo '    except:' >> $powerbuttonscript
echo '        return []' >> $powerbuttonscript
echo '    return newconfig' >> $powerbuttonscript

echo 'def temp_check():' >> $powerbuttonscript
echo '    fanconfig = ["65=100", "60=55", "55=10"]' >> $powerbuttonscript
echo '    tmpconfig = load_config("'$daemonconfigfile'")' >> $powerbuttonscript
echo '    if len(tmpconfig) > 0:' >> $powerbuttonscript
echo '        fanconfig = tmpconfig' >> $powerbuttonscript
echo '    address=0x1a' >> $powerbuttonscript
echo '    prevblock=0' >> $powerbuttonscript
echo '    while True:' >> $powerbuttonscript

echo '        try:' >> $powerbuttonscript
echo '            tempfp = open("/sys/class/thermal/thermal_zone0/temp", "r")' >> $powerbuttonscript
echo '            temp = tempfp.readline()' >> $powerbuttonscript
echo '            tempfp.close()' >> $powerbuttonscript
echo '            val = float(int(temp)/1000)' >> $powerbuttonscript
echo '        except IOError:' >> $powerbuttonscript
echo '            val = 0' >> $powerbuttonscript

echo '        block = get_fanspeed(val, fanconfig)' >> $powerbuttonscript
echo '        if block < prevblock:' >> $powerbuttonscript
echo '            time.sleep(30)' >> $powerbuttonscript
echo '        prevblock = block' >> $powerbuttonscript
echo '        try:' >> $powerbuttonscript
echo '            if block > 0:' >> $powerbuttonscript
echo '                bus.write_byte(address,100)' >> $powerbuttonscript
echo '                time.sleep(1)' >> $powerbuttonscript
echo '            bus.write_byte(address,block)' >> $powerbuttonscript
echo '        except IOError:' >> $powerbuttonscript
echo '            temp=""' >> $powerbuttonscript
echo '        time.sleep(30)' >> $powerbuttonscript

echo 'try:' >> $powerbuttonscript
echo '    t1 = Thread(target = shutdown_check)' >> $powerbuttonscript
echo '    t2 = Thread(target = temp_check)' >> $powerbuttonscript
echo '    t1.start()' >> $powerbuttonscript
echo '    t2.start()' >> $powerbuttonscript
echo 'except:' >> $powerbuttonscript
echo '    t1.stop()' >> $powerbuttonscript
echo '    t2.stop()' >> $powerbuttonscript
echo '    GPIO.cleanup()' >> $powerbuttonscript

sudo chmod 755 $powerbuttonscript

argon_create_file $daemonfanservice

# Fan Daemon
echo "[Unit]" >> $daemonfanservice
echo "Description=Argon One Fan and Button Service" >> $daemonfanservice
echo "After=multi-user.target" >> $daemonfanservice
echo '[Service]' >> $daemonfanservice
echo 'Type=simple' >> $daemonfanservice
echo "Restart=always" >> $daemonfanservice
echo "RemainAfterExit=true" >> $daemonfanservice
echo "ExecStart=/usr/bin/python3 $powerbuttonscript" >> $daemonfanservice
echo '[Install]' >> $daemonfanservice
echo "WantedBy=multi-user.target" >> $daemonfanservice

sudo chmod 644 $daemonfanservice

argon_create_file $removescript

# Uninstall Script
echo '#!/bin/bash' >> $removescript
echo 'echo "-------------------------"' >> $removescript
echo 'echo "Argon One Uninstall Tool"' >> $removescript
echo 'echo "-------------------------"' >> $removescript
echo 'echo -n "Press Y to continue:"' >> $removescript
echo 'read -n 1 confirm' >> $removescript
echo 'echo' >> $removescript
echo 'if [ "$confirm" = "y" ]' >> $removescript
echo 'then' >> $removescript
echo '    confirm="Y"' >> $removescript
echo 'fi' >> $removescript
echo '' >> $removescript
echo 'if [ "$confirm" != "Y" ]' >> $removescript
echo 'then' >> $removescript
echo '    echo "Cancelled"' >> $removescript
echo '    exit' >> $removescript
echo 'fi' >> $removescript
echo 'if [ -d "/home/pi/Desktop" ]; then' >> $removescript
echo '    sudo rm "/home/pi/Desktop/argonone-config.desktop"' >> $removescript
echo '    sudo rm "/home/pi/Desktop/argonone-uninstall.desktop"' >> $removescript
echo 'fi' >> $removescript
echo 'if [ -f '$powerbuttonscript' ]; then' >> $removescript
echo '    sudo systemctl stop '$daemonname'.service' >> $removescript
echo '    sudo systemctl disable '$daemonname'.service' >> $removescript
echo '    sudo /usr/bin/python3 '$shutdownscript' uninstall' >> $removescript
echo '    sudo rm '$powerbuttonscript >> $removescript
echo '    sudo rm '$shutdownscript >> $removescript
echo '    sudo rm '$removescript >> $removescript
echo '    echo "Removed Argon One Services."' >> $removescript
echo '    echo "Cleanup will complete after restarting the device."' >> $removescript
echo 'fi' >> $removescript

sudo chmod 755 $removescript

argon_create_file $configscript

# Config Script
echo '#!/bin/bash' >> $configscript
echo 'daemonconfigfile='$daemonconfigfile >> $configscript
echo 'echo "--------------------------------------"' >> $configscript
echo 'echo "Argon One Fan Speed Configuration Tool"' >> $configscript
echo 'echo "--------------------------------------"' >> $configscript
echo 'echo "WARNING: This will remove existing configuration."' >> $configscript
echo 'echo -n "Press Y to continue:"' >> $configscript
echo 'read -n 1 confirm' >> $configscript
echo 'echo' >> $configscript
echo 'if [ "$confirm" = "y" ]' >> $configscript
echo 'then' >> $configscript
echo '    confirm="Y"' >> $configscript
echo 'fi' >> $configscript
echo '' >> $configscript
echo 'if [ "$confirm" != "Y" ]' >> $configscript
echo 'then' >> $configscript
echo '    echo "Cancelled"' >> $configscript
echo '    exit' >> $configscript
echo 'fi' >> $configscript
echo 'echo "Thank you."' >> $configscript

echo 'get_number () {' >> $configscript
echo '    read curnumber' >> $configscript
echo '    if [ -z "$curnumber" ]' >> $configscript
echo '    then' >> $configscript
echo '        echo "-2"' >> $configscript
echo '        return' >> $configscript
echo '    elif [[ $curnumber =~ ^[+-]?[0-9]+$ ]]' >> $configscript
echo '    then' >> $configscript
echo '        if [ $curnumber -lt 0 ]' >> $configscript
echo '        then' >> $configscript
echo '            echo "-1"' >> $configscript
echo '            return' >> $configscript
echo '        elif [ $curnumber -gt 100 ]' >> $configscript
echo '        then' >> $configscript
echo '            echo "-1"' >> $configscript
echo '            return' >> $configscript
echo '        fi    ' >> $configscript
echo '        echo $curnumber' >> $configscript
echo '        return' >> $configscript
echo '    fi' >> $configscript
echo '    echo "-1"' >> $configscript
echo '    return' >> $configscript
echo '}' >> $configscript
echo '' >> $configscript

echo 'loopflag=1' >> $configscript
echo 'while [ $loopflag -eq 1 ]' >> $configscript
echo 'do' >> $configscript
echo '    echo' >> $configscript
echo '    echo "Select fan mode:"' >> $configscript
echo '    echo "  1. Always on"' >> $configscript
echo '    echo "  2. Adjust to temperatures (55C, 60C, and 65C)"' >> $configscript
echo '    echo "  3. Customize behavior"' >> $configscript
echo '    echo "  4. Cancel"' >> $configscript
echo '    echo "NOTE: You can also edit $daemonconfigfile directly"' >> $configscript
echo '    echo -n "Enter Number (1-4):"' >> $configscript
echo '    newmode=$( get_number )' >> $configscript
echo '    if [[ $newmode -ge 1 && $newmode -le 4 ]]' >> $configscript
echo '    then' >> $configscript
echo '        loopflag=0' >> $configscript
echo '    fi' >> $configscript
echo 'done' >> $configscript

echo 'echo' >> $configscript
echo 'if [ $newmode -eq 4 ]' >> $configscript
echo 'then' >> $configscript
echo '    echo "Cancelled"' >> $configscript
echo '    exit' >> $configscript
echo 'elif [ $newmode -eq 1 ]' >> $configscript
echo 'then' >> $configscript
echo '    echo "#" > $daemonconfigfile' >> $configscript
echo '    echo "# Argon One Fan Speed Configuration" >> $daemonconfigfile' >> $configscript
echo '    echo "#" >> $daemonconfigfile' >> $configscript
echo '    echo "# Min Temp=Fan Speed" >> $daemonconfigfile' >> $configscript
echo '    echo 1"="100 >> $daemonconfigfile' >> $configscript
echo '    sudo systemctl restart '$daemonname'.service' >> $configscript
echo '    echo "Fan always on."' >> $configscript
echo '    exit' >> $configscript
echo 'elif [ $newmode -eq 2 ]' >> $configscript
echo 'then' >> $configscript
echo '    echo "Please provide fan speeds for the following temperatures:"' >> $configscript
echo '    echo "#" > $daemonconfigfile' >> $configscript
echo '    echo "# Argon One Fan Speed Configuration" >> $daemonconfigfile' >> $configscript
echo '    echo "#" >> $daemonconfigfile' >> $configscript
echo '    echo "# Min Temp=Fan Speed" >> $daemonconfigfile' >> $configscript
echo '    curtemp=55' >> $configscript
echo '    while [ $curtemp -lt 70 ]' >> $configscript
echo '    do' >> $configscript
echo '        errorfanflag=1' >> $configscript
echo '        while [ $errorfanflag -eq 1 ]' >> $configscript
echo '        do' >> $configscript
echo '            echo -n ""$curtemp"C (0-100 only):"' >> $configscript
echo '            curfan=$( get_number )' >> $configscript
echo '            if [ $curfan -ge 0 ]' >> $configscript
echo '            then' >> $configscript
echo '                errorfanflag=0' >> $configscript
echo '            fi' >> $configscript
echo '        done' >> $configscript
echo '        echo $curtemp"="$curfan >> $daemonconfigfile' >> $configscript
echo '        curtemp=$((curtemp+5))' >> $configscript
echo '    done' >> $configscript

echo '    sudo systemctl restart '$daemonname'.service' >> $configscript
echo '    echo "Configuration updated."' >> $configscript
echo '    exit' >> $configscript
echo 'fi' >> $configscript

echo 'echo "Please provide fan speeds and temperature pairs"' >> $configscript
echo 'echo' >> $configscript

echo 'loopflag=1' >> $configscript
echo 'paircounter=0' >> $configscript
echo 'while [ $loopflag -eq 1 ]' >> $configscript
echo 'do' >> $configscript
echo '    errortempflag=1' >> $configscript
echo '    errorfanflag=1' >> $configscript
echo '    while [ $errortempflag -eq 1 ]' >> $configscript
echo '    do' >> $configscript
echo '        echo -n "Provide minimum temperature (in Celsius) then [ENTER]:"' >> $configscript
echo '        curtemp=$( get_number )' >> $configscript
echo '        if [ $curtemp -ge 0 ]' >> $configscript
echo '        then' >> $configscript
echo '            errortempflag=0' >> $configscript
echo '        elif [ $curtemp -eq -2 ]' >> $configscript
echo '        then' >> $configscript
echo '            errortempflag=0' >> $configscript
echo '            errorfanflag=0' >> $configscript
echo '            loopflag=0' >> $configscript
echo '        fi' >> $configscript
echo '    done' >> $configscript
echo '    while [ $errorfanflag -eq 1 ]' >> $configscript
echo '    do' >> $configscript
echo '        echo -n "Provide fan speed for "$curtemp"C (0-100) then [ENTER]:"' >> $configscript
echo '        curfan=$( get_number )' >> $configscript
echo '        if [ $curfan -ge 0 ]' >> $configscript
echo '        then' >> $configscript
echo '            errorfanflag=0' >> $configscript
echo '        elif [ $curfan -eq -2 ]' >> $configscript
echo '        then' >> $configscript
echo '            errortempflag=0' >> $configscript
echo '            errorfanflag=0' >> $configscript
echo '            loopflag=0' >> $configscript
echo '        fi' >> $configscript
echo '    done' >> $configscript
echo '    if [ $loopflag -eq 1 ]' >> $configscript
echo '    then' >> $configscript
echo '        if [ $paircounter -eq 0 ]' >> $configscript
echo '        then' >> $configscript
echo '            echo "#" > $daemonconfigfile' >> $configscript
echo '            echo "# Argon One Fan Speed Configuration" >> $daemonconfigfile' >> $configscript
echo '            echo "#" >> $daemonconfigfile' >> $configscript
echo '            echo "# Min Temp=Fan Speed" >> $daemonconfigfile' >> $configscript
echo '        fi' >> $configscript
echo '        echo $curtemp"="$curfan >> $daemonconfigfile' >> $configscript
echo '        ' >> $configscript
echo '        paircounter=$((paircounter+1))' >> $configscript
echo '        ' >> $configscript
echo '        echo "* Fan speed will be set to "$curfan" once temperature reaches "$curtemp" C"' >> $configscript
echo '        echo' >> $configscript
echo '    fi' >> $configscript
echo 'done' >> $configscript
echo '' >> $configscript
echo 'echo' >> $configscript
echo 'if [ $paircounter -gt 0 ]' >> $configscript
echo 'then' >> $configscript
echo '    echo "Thank you!  We saved "$paircounter" pairs."' >> $configscript
echo '    sudo systemctl restart '$daemonname'.service' >> $configscript
echo '    echo "Changes should take effect now."' >> $configscript
echo 'else' >> $configscript
echo '    echo "Cancelled, no data saved."' >> $configscript
echo 'fi' >> $configscript

sudo chmod 755 $configscript


sudo systemctl daemon-reload
sudo systemctl enable $daemonname.service

sudo systemctl start $daemonname.service


shortcutfile="/home/pi/Desktop/argonone-config.desktop"
if [ "$CHECKPLATFORM" = "Raspbian" ] && [ -d "/home/pi/Desktop" ]
then
    terminalcmd="lxterminal --working-directory=/home/pi/ -t"
    if  [ -f "/home/pi/.twisteros.twid" ]
    then
        terminalcmd="xfce4-terminal --default-working-directory=/home/pi/ -T"
    fi
    sudo wget http://download.argon40.com/ar1config.png -O /usr/share/pixmaps/ar1config.png --quiet
    sudo wget http://download.argon40.com/ar1uninstall.png -O /usr/share/pixmaps/ar1uninstall.png --quiet
    # Create Shortcuts
    echo "[Desktop Entry]" > $shortcutfile
    echo "Name=Argon One Configuration" >> $shortcutfile
    echo "Comment=Argon One Configuration" >> $shortcutfile
    echo "Icon=/usr/share/pixmaps/ar1config.png" >> $shortcutfile
    echo 'Exec='$terminalcmd' "Argon One Configuration" -e '$configscript >> $shortcutfile
    echo "Type=Application" >> $shortcutfile
    echo "Encoding=UTF-8" >> $shortcutfile
    echo "Terminal=false" >> $shortcutfile
    echo "Categories=None;" >> $shortcutfile
    chmod 755 $shortcutfile
    
    shortcutfile="/home/pi/Desktop/argonone-uninstall.desktop"
    echo "[Desktop Entry]" > $shortcutfile
    echo "Name=Argon One Uninstall" >> $shortcutfile
    echo "Comment=Argon One Uninstall" >> $shortcutfile
    echo "Icon=/usr/share/pixmaps/ar1uninstall.png" >> $shortcutfile
    echo 'Exec='$terminalcmd' -t "Argon One Uninstall" --working-directory=/home/pi/ -e '$removescript >> $shortcutfile
    echo "Type=Application" >> $shortcutfile
    echo "Encoding=UTF-8" >> $shortcutfile
    echo "Terminal=false" >> $shortcutfile
    echo "Categories=None;" >> $shortcutfile
    chmod 755 $shortcutfile
fi

# IR config script
sudo wget https://download.argon40.com/argonone-irconfig.sh -O /usr/bin/argonone-ir --quiet
sudo chmod 755 /usr/bin/argonone-ir

echo "***************************"
echo "Argon One Setup Completed."
echo "***************************"
echo
if [ ! "$CHECKPLATFORM" = "Raspbian" ]
then
        echo "You may need to reboot for changes to take effect"
        echo
fi 
if [ -f $shortcutfile ]; then
    echo Shortcuts created in your desktop.
else
    echo Use 'argonone-config' to configure fan
    echo Use 'argonone-uninstall' to uninstall
fi
echo