Hi. Ich möchte eine externe Soundkarte zum laufen bringen aber leider klappt es nicht. Wäre super wenn mir jemand helfen könnte. Ich hab vor allem das hier versucht: Externe Soundkarte (Installation wie?)
Anbei ein paar Infos die euch (und dann mir) hoffentlich weiterhelfen.
Code
pi@raspberrypi ~ $ sudo lsusb
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 004: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Bus 001 Device 005: ID 0d8c:000e C-Media Electronics, Inc. Audio Adapter (Planet UP-100, Genius G-Talk)
Code
pi@raspberrypi ~ $ cat /proc/asound/cards
0 [Device ]: USB-Audio - Generic USB Audio Device
Generic USB Audio Device at usb-bcm2708_usb-1.3, full speed
1 [ALSA ]: BRCM bcm2835 ALSbcm2835 ALSA - bcm2835 ALSA
bcm2835 ALSA
/etc/modprobe.d/alsa-base.conf (little messy right now?)
Code
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd$
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modp$
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modp$
# Keep snd-pcsp from beeing loaded as first soundcard
#options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
#options snd-usb-audio index=-2
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio nrpacks=1
Alles anzeigen
/etc/asound.conf (hat vorher nicht existiert)
das hier funktionert nicht.
Code
pi@raspberrypi ~ $ aplay -D plug:hw:0 /usr/share/sounds/alsa/Front_Center.wav
aplay: main:682: audio open error: Device or resource busy
das hier funktioniert. Aber leider nur über den Klinken-Ausgang.
Code
pi@raspberrypi ~ $ aplay -D plug:hw:1 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
Bin für jede Hilfe dankbar! Vielleicht hilft mir auch die eine oder andere Erklärung weiter (Ich weiß nicht so genau was ich tue. Wie man wahrscheinlich sieht.)