Also nochmal zusammengefasst:
Ich arbeite mit dnsmasq und hostapd und folgender Konfiguration:
/etc/network/interfaces
auto lo
iface lo inet loopback
iface eth0 inet dhcp
auto wlan0
allow-hotplug wlan0
iface wlan0 inet static
address 192.168.0.1
netmask 255.255.255.0
Alles anzeigen
/etc/hostapd/hostapd.conf
interface=wlan0
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout=2
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ssid=RPI
country_code=DE
channel=3
max_num_sta=32
rts_threshold=2347
fragm_threshold=2346
macaddr_acl=0
auth_algs=3
ignore_broadcast_ssid=0
wmm_enabled=0
ap_max_inactivity=300
wpa=2
wpa_passphrase=meinpasswort
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
rsn_pairwise=CCMP
wpa_group_rekey=600
Alles anzeigen
/etc/dnsmasq.conf
interface=wlan0
no-dhcp-interface=eth0
dhcp-range=192.168.0.100,192.168.0.200,255.255.255.0,infinite
Er zeigt weiterhin immer an "Ungültiges Passwort".
Ohne Passwort funktioniert alles und ich bekomme eine IP.
Hat noch jemand eine Idee?
Beste Grüße
Stephan