die 2 habe ich versucht,
Raspberry Pi3 mit LCD Waveshare 4 inch mit ,Recalbox os
http://www.newsby2.com/2017/04/10/how…creen-retropie/
komme bei beiden aber nur bis zum befehl ./LCD35-show
die 2 habe ich versucht,
Raspberry Pi3 mit LCD Waveshare 4 inch mit ,Recalbox os
http://www.newsby2.com/2017/04/10/how…creen-retropie/
komme bei beiden aber nur bis zum befehl ./LCD35-show
stimmt dreamshader, ich konnte sudo einfach weg lassen, danke dafür
hier poste ich mal was ich eingebe und da sieht man dann auch wo es nicht weiter geht, vielleicht kennst du dich ja damit aus
# tar xvf LCD-show-*.tar.gz
LCD-show/
LCD-show/LCD101-1024x600-show
LCD-show/LCD7-1024x600-show
LCD-show/LCD35B-show
LCD-show/cmdline.txt-noobs
LCD-show/LCD43-show
LCD-show/LCD28-show
LCD-show/etc/
LCD-show/etc/X11/
LCD-show/etc/X11/xorg.conf.d/
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35cpld-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35cpld-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35cpld
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35H
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35cpld-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-180
LCD-show/waveshare35cpld-overlay.dtb
LCD-show/LCD4-show
LCD-show/inittab
LCD-show/LCD32-show
LCD-show/waveshare35a-overlay.dtb
LCD-show/xinput-calibrator_0.7.5-1_armhf.deb
LCD-show/waveshare32b-overlay.dtb
LCD-show/LCD7-800x480-show
LCD-show/LCD35-HDMI-800x480-show
LCD-show/boot/
LCD-show/boot/config-4-800x480.txt-180
LCD-show/boot/config-35b.txt
LCD-show/boot/config-35.txt-270
LCD-show/boot/config-101-1024x600.txt-90
LCD-show/boot/config-35cpld.txt-270
LCD-show/boot/config-101-1024x600.txt
LCD-show/boot/config-35H-480x320.txt-180
LCD-show/boot/config-5.txt-90
LCD-show/boot/config-32.txt-270
LCD-show/boot/config-7-800x480.txt
LCD-show/boot/config-35H-480x320.txt-90
LCD-show/boot/config-7-1024x600.txt
LCD-show/boot/config-101-1024x600.txt-270
LCD-show/boot/config-35b.txt-90
LCD-show/boot/config-4.txt-180
LCD-show/boot/config-35b.txt-270
LCD-show/boot/config-35H-480x320.txt-270
LCD-show/boot/config-nomal.txt
LCD-show/boot/config-32.txt-90
LCD-show/boot/config-101-1024x600.txt-180
LCD-show/boot/config-43.txt-90
LCD-show/boot/config-43.txt-180
LCD-show/boot/config-43.txt-270
LCD-show/boot/config-4-800x480.txt-270
LCD-show/boot/config-7-800x480.txt-270
LCD-show/boot/config-7-1024x600.txt-90
LCD-show/boot/config-43.txt
LCD-show/boot/config-35H-480x320.txt
LCD-show/boot/config-7-800x480.txt-180
LCD-show/boot/config-5.txt
LCD-show/boot/config-32.txt
LCD-show/boot/config-7-1024x600.txt-270
LCD-show/boot/config-35.txt-180
LCD-show/boot/config-4.txt
LCD-show/boot/config-35b.txt-180
LCD-show/boot/config-4-800x480.txt-270Y
LCD-show/boot/config-35.txt
LCD-show/boot/config-4.txt-90
LCD-show/boot/config-5.txt-180
LCD-show/boot/config-5.txt-270
LCD-show/boot/config-35cpld.txt
LCD-show/boot/config-4-800x480.txt
LCD-show/boot/config-35cpld.txt-180
LCD-show/boot/config-7-1024x600.txt-180
LCD-show/boot/mark
LCD-show/boot/config-32.txt-180
LCD-show/boot/config-7-800x480.txt-90
LCD-show/boot/config-35.txt-90
LCD-show/boot/config-4.txt-270
LCD-show/boot/config-35cpld.txt-90
LCD-show/boot/config-4-800x480.txt-90
LCD-show/cmdline.txt
LCD-show/LCD4-800x480-show
LCD-show/dtc.sh
LCD-show/\r/
LCD-show/\r/99-calibration.conf-101-1024x600
LCD-show/waveshare35b-overlay.dtb
LCD-show/LCD35CPLD-show
LCD-show/LCD5-show
LCD-show/LCD35-show
LCD-show/LCD-hdmi
LCD-show/LCD35-HDMI-480x320-show
LCD-show/usr/
LCD-show/usr/share/
LCD-show/usr/share/X11/
LCD-show/usr/share/X11/xorg.conf.d/
LCD-show/usr/share/X11/xorg.conf.d/99-fbturbo.conf
LCD-show/usr/share/X11/xorg.conf.d/45-evdev.conf
LCD-show/usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI
# cd LCD-show/
# chmod +x LCD35-show
# ./LCD35-show
./LCD35-show: line 13: sudo: command not found
./LCD35-show: line 14: sudo: command not found
./LCD35-show: line 19: sudo: command not found
./LCD35-show: line 20: sudo: command not found
LCD configrue 0
./LCD35-show: line 36: sudo: command not found
./LCD35-show: line 37: sudo: command not found
./LCD35-show: line 38: sudo: command not found
./LCD35-show: line 40: sudo: command not found
./LCD35-show: line 45: sudo: command not found
./LCD35-show: line 48: sudo: command not found
reboot now
ok hört sich natürlich logisch an
kenne mich damit nun mal leider nicht aus, haben alles wie in einer Anleitung gemacht und komme dann eben bei dem befehl nicht weiter
"./LCD35-show" aber ich weiß nicht warum hab alles so wie in der Anleitung gemacht
wenn ich "scripte.sh" eingebe kommt auch wieder command not fund
# scripte.sh
-sh: scripte.sh: command not found
#
Hi,
welches OS benutzt Du?
cu,
-ds-
Recalbox ist drauf installiert
Hallo zusammen,
kann mir bitte jemand sagen wie ich die sudo Funktion bei Putty aktivieren kann? oder mir sagen was ich falsch mache? immer wenn ich ein befehl eingebe mit sudo zum beispiel "sudo bash pitft-fbcp.sh"
oder "./LCD35-show" kommt dann ein text mit " sudo Command not Fund "
weiß da jemand was ich machen kann? versuche es schon seit 2 tagen
5V Umbau erfolgreich durchgeführt?
den Umbau auf 5v habe ich zumindest versucht,
aber wenn das Board ein 5v Board ist muss ich den umbau dann überhaupt machen?
Mein Plan war das Display und den Raspberry Pi 3 in ein Gameboy Gehäuse zu bauen,
und weil da nicht so viel platz ist wollte ich es "wenn möglich" am besten direkt anlöten damit nicht soviel platz durch die Kabel und Anschlüsse, im Gehäuse verschwendet wird.
Wie gesagt es gibt einige die diesen Bildschirm an einen Raspberry Pi Zero angelötet haben deswegen dachte ich es würde auch bei einem Raspberry Pi3 funktionieren
hier habe ich ein Kommentar von jemandem der das Display an einen Raspberry Zero angeschlossen hat
""Umbau auf 5V ist in 5 Minuten mit einen Jumper-Kabel erledigt. Ohne den 5V Umbau hat der Screen Aussetzer und ein sehr stark rauschendes Bild. Nach dem Umbau ist das Bild ausreichend bis gut um zB Spiele auf dem RetroPi laufen zu lassen.
Nachtrag: Seit Anfang 2017 wird ein neues Board verschickt, das direkt mit 5V läuft. Gefühlt ist der Blickwinkel etwas enger geworden, ist aber noch voll in Ordnung.""
Hallo zusammen,
ich bin leider ein ziemlicher Neuling was das Löten oder den Umgang mit Platinen angeht,
trotzdem wollte ich versuchen ein Display an einen Raspberry Pi 3 anzulöten, jetzt versuche ich es schon seit einigen tagen aber bekomme es einfach nicht hin... das einzige was passiert ist dass das Display kurz flimmert beim einschalten.
vielleicht kennt sich ja jemand damit aus und kann mir weiter helfen
also das Display wurde von einigen Leuten umgelötet, und dann an einen Raspberry Pi Zero angelötet, dann müsste es ja eigentlich auch an einem Raspberry Pi3 funktionieren oder sehe ich das falsch?
hier ist das Display: