Nur zur Info ...
Ich habe irgendwie angenommen dass auf dem Steckbrett die Reihen unten und oben durchgängig sind.
Sind aber in der Mitte getrennt.
Vielleicht hilft es Steckbrettneulingen ( wie mir )
Beiträge von Snake
-
-
Hi
Ich brauch auch mal Unterstützung.
Die Ausgabe sah bei mir genauso aus ... ist also von der Reihenfolge abhängig.
Leider bekomme ich nicht die Adresse 0×20 angezeigt?!?
Gleich angeschlossen, nur ohne Taster,LED,Wiederstände.
Hier mal meine Ausgabe... (gibt es weitere möglichkeiten zu testen?)....
[ 120.553296] bcm2708_i2c_init_pinmode(0,0)
[ 120.553327] bcm2708_i2c_init_pinmode(0,1)
[ 120.553843] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100k)
[ 120.553964] bcm2708_i2c_init_pinmode(1,2)
[ 120.553982] bcm2708_i2c_init_pinmode(1,3)
[ 120.559471] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100k)
root@rasptemp:~# lsmod
Module Size Used by
i2c_bcm2708 3949 0
i2c_dev 5557 0
w1_gpio 2363 0
w1_therm 2921 0
wire 24832 2 w1_gpio,w1_therm
cn 4783 1 wire
snd_soc_bcm2708_i2s 5474 0
regmap_mmio 2806 1 snd_soc_bcm2708_i2s
snd_soc_core 131268 1 snd_soc_bcm2708_i2s
regmap_spi 1897 1 snd_soc_core
snd_pcm 81593 1 snd_soc_core
snd_page_alloc 5156 1 snd_pcm
regmap_i2c 1645 1 snd_soc_core
snd_compress 8076 1 snd_soc_core
snd_seq 53769 0
snd_timer 20133 2 snd_pcm,snd_seq
snd_seq_device 6473 1 snd_seq
leds_gpio 2059 0
led_class 3688 1 leds_gpio
snd 61291 6 snd_soc_core,snd_timer,snd_pcm,snd_seq,snd_seq_device,snd_compress
spi_bcm2708 4728 0
root@raspi:~# i2cdetect -y 0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
root@raspi:~# i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
root@raspi:~#
DANKE für's Helfen.